Authors:
M. S. Pazlin,M.Y. Yuhazri,N. Hassan,DOI NO:
https://doi.org/10.26782/jmcms.2025.08.00009Keywords:
Impact strength,Lamination,Low-velocity impact,Mechanical properties,Stacking-configuration,Abstract
Rattan, a widely used non-timber forest product in Malaysia, plays a crucial role in the furniture and craft industries due to its cost-effectiveness and environmental benefits compared to synthetic fibres such as lignocellulosic fibre. Despite its potential, limited research has been conducted on the incorporation of rattan fibres into polymeric composites. This study investigates the impact resistance of epoxy matrix composites reinforced with rattan fibres, particularly in laminated hybrid configurations with aramid. Composites were fabricated using the vacuum bagging technique, and impact strength was assessed through Charpy impact tests per ASTM standards. Various laminate stacking sequences and thicknesses were evaluated. The results revealed that impact strength improved with increased lamination thickness, with the optimal configuration being a 7-layer laminate comprising four plain-woven rattan layers and three aramid layers. This configuration achieved an average energy absorption of 26.10 J and a tensile strength of 372.89 kJ/m². Morphological analysis confirmed effective bonding between the natural and synthetic fibres, supporting the viability of hybrid composites for low-impact applications. Overall, the findings highlight rattan’s potential as a sustainable reinforcement material in polymeric composites, offering an eco-friendly alternative for enhancing the performance and sustainability of furniture and related products.Refference:
I. Akil, H. M., Cheng, L. W., Ishak, Z. A. M., Bakar, A. A., and Rahman, M. A. A., “Water Absorption Study On Pultruded Jute Fibre Reinforced Unsaturated Polyester Composites,” Composites Science And Technology, vol. 69, no. 11-12, (2009), pp. 1942-1948. 10.1016/j.compscitech.2009.04.014
II. Akin, D. E., Foulk, J. A., Dodd, R. B. and McAlister III, D. D., “Enzyme-Retting Of Flax And Characterization Of Processed Fibres,” Journal of Biotechnology, vol. 89, no. 2-3, (2001), pp. 193-203. 10.1016/S0168-1656(01)00298-X
III. A. Valadez-Gonzalez, J. M. Cervantes-Uc, R. Olayo, and P. J. Herrera-Franco, “Chemical Modification Of Henequen Fibers With An Organosilane Coupling Agent,” Composites Part B: Engineering, vol. 30, (1999), no. 3, pp. 321–331. 10.1016/S1359-8368(98)00055-9
IV. Arbelaiz, A., et al. “Flax fiber surface modifications: Effects on fiber physico mechanical and flax/polypropylene interface properties.” Polymer composites 26.3 (2005): 324-332. 10.1002/pc.20097
V. A. A. Rashid, D. W. Junaidy, N. A. H. Hamizah, M. Z. A. Ezran, M. A. Firuz, and M. H. Firdaus, “Rattan Furniture Design-Training Delivery Towards Commercial Value Of Commodity Sector,” Proceedings of the 3rd National Conference on Knowledge Transfer, Penang, Malaysia, 2016. https://www.academia.edu/download/51856414/NCKT16_RATTAN_FURNITURE_FINAL.pdf
VI. Balakrishna, N. S., Ismail, H., and Othman, N., “The Effects Of Rattan Filler Loading On Properties Of Rattan Powder-Filled Polypropylene Composites,” BioResources, vol. 7, no. 4, (2012), pp. 5677-5690. https://www.academia.edu/download/80683426/d2b2d23af00010a014de5d1bfd6e3a7da6fe.pdf
VII. Baltazar-y-Jimenez, Alexis, et al. “Atmospheric air pressure plasma treatment of lignocellulosic fibres: Impact on mechanical properties and adhesion to cellulose acetate butyrate.” Composites Science and Technology 68.1 (2008): 215-227. 10.1016/j.compscitech.2007.04.028
VIII. B. Effah, E. Boampong, O. Asibey, N. A. Pongo, and A. Nkrumah, “Small And Medium Bamboo And Rattan Enterprises In Economic Empowerment In Kumasi: Perspectives Of Producers,” Journal of Social Economics, vol. 1, (2014), no. 1, pp. 11–21. https://www.academia.edu/download/37178017/Small_and_Medium_Bamboo_and_Rattan_Enterprises_in_Economic_Empowerment_in_Kumasi_Perspectives_of_Producers.pdf
IX. B. Lee, H. Kim, S. Lee, H. Kim, and J. R. Dorgan, “Bio-Composites Of Kenaf Fibers In Polylactide: Role Of Improved Interfacial Adhesion In The Carding Process,” Composites Science and Technology, vol. 69, (2009), no. 15-16, pp. 2573–2579. 10.1016/j.compscitech.2009.07.015
X. Bledzki, Andrzej K., and Jochen Gassan. “Composites reinforced with cellulose based fibres.” Progress in polymer science 24.2 (1999): 221-274. 10.1016/S0079-6700(98)00018-5
XI. Bos, Harriëtte L., Jörg Müssig, and Martien JA van den Oever. “Mechanical properties of short-flax-fibre reinforced compounds. ” Composites Part A: Applied Science and Manufacturing 37.10 (2006): 1591-1604. 10.1016/j.compositesa.2005.10.011
XII. Chandramohan, D., and A. John Presin Kumar. “Experimental data on the properties of natural fiber particle reinforced polymer composite material. ” Data in brief 13 (2017): 460-468. 10.1016/j.dib.2017.06.020
XIII. Davies, Gary C., and David M. Bruce. “Effect of environmental relative humidity and damage on the tensile properties of flax and nettle fibers. ” Textile Research Journal 68.9 (1998): 623-629. 10.1177/004051759806800901
XIV. Gassan, Jochen. “A study of fibre and interface parameters affecting the fatigue behaviour of natural fibre composites.” Composites part A: applied science and manufacturing 33.3 (2002): 369-374. 10.1016/S1359-835X(01)00116-6
XV. H. N. Dhakal, Z. Y. Zhang, and M. O. W. Richardson, “Effect Of Water Absorption On The Mechanical Properties Of Hemp Fibre Reinforced Unsaturated Polyester Composites,” Composites Science and Technology, vol. 67, (2007), no. 7-8, pp. 1674–1683. 10.1016/j.compscitech.2006.06.019
XVI. H. Qian, A. Bismarck, E. S. Greenhalgh, and M. S. Shaffer, “Carbon Nanotube Grafted Silica Fibres: Characterising The Interface At The Single Fibre Level,” Composites Science and Technology, vol. 70, (2010), no. 2, pp. 393–399. 10.1016/j.compscitech.2009.11.014
XVII. Huda, Masud S., et al. “Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly (lactic acid) (PLA) composites: A comparative study.” Composites science and technology 66.11-12 (2006): 1813-1824. 10.1016/j.compscitech.2005.10.015
XVIII. K. Joseph, S. Thomas, C. Pavithran, and M. Brahmakumar, “Tensile Properties Of Short Sisal Fiber-Reinforced Polyethylene Composites,” Journal of Applied Polymer Science, vol. 47, (1993), no. 10, pp. 1731–10.1002/app.1993.070471003
XIX. Lee, B., Kim, H., Lee, S., Kim, H., and Dorgan, J. R., “Bio-Composites Of Kenaf Fibers In Polylactide: Role Of Improved Interfacial Adhesion In The Carding Process”, Composites Science and Technology, vol. 69, no. 15-16, (2009), pp. 2573-2579. 10.1016/j.compscitech.2009.07.015
XX. Lucas, E. B., and B. I. O. Dahunsi. “Bond strenght in concrete of canes from three rattan species.” Journal of Applied Science, Engineering and Technology 4.1 (2004): 1-5. 10.4314/jaset.v4i1.38281
XXI. Malhotra, N., Sheikh, K., and Rani, S., “A Review On Mechanical Characterization Of Natural Fibre Reinforced Polymer Composites,” Journal of Engineering Research and Studies, vol. 3, (2012), pp. 75-80. https://www.academia.edu/download/96136346/Article_2015_20JERS_20Vol_20III_20Issue_20I.pdf
XXII. M. M. Haque, M. Hasan, M. S. Islam, and M. E. Ali, “Physico-Mechanical Properties Of Chemically Treated Palm And Coir Fiber Reinforced Polypropylene Composites,” Bioresource Technology, vol. 100, (2009), no. 20, pp. 4903–4906. 10.1016/j.biortech.2009.04.072
XXIII. Morrison III, W. H., Archibald, D. D., Sharma, H. S. S., and Akin, D. E., “Chemical And Physical Characterization Of Water-And Dew-Retted Flax Fibres, Industrial Crops And Products,” vol. 12, no. 1, (2000), pp. 39-46. 10.1016/S0926-6690(99)00044-8
XXIV. M. Wollerdorfer and H. Bader, “Influence Of Natural Fibres On The Mechanical Properties Of Biodegradable Polymers,” Industrial Crops and Products, vol. 8, (1998), no. 2, pp. 105–112. 10.1016/S0926-6690(97)10015-2
XXV. N. Ayrilmis, S. Jarusombuti, V. Fueangvivat, P. Bauchongkol, and R. H. White, “Coir Fiber Reinforced Polypropylene Composite Panel For Automotive Interior Applications,” Fibers and Polymers, vol. 12, (2011), no. 7, pp. 919. 10.1007/s12221-011-0919-1
XXVI. Nechwatal, Axel, Klaus-Peter Mieck, and Thomas Reußmann. “Developments in the characterization of natural fibre properties and in the use of natural fibres for composites.” Composites Science and Technology 63.9 (2003): 1273-1279. 10.1016/S0266-3538(03)00098-8
XXVII. P. V. Joseph, K. Joseph, and S. Thomas, “Effect Of Processing Variables On The Mechanical Properties Of Sisal-Fiber-Reinforced Polypropylene Composites,” Composites Science and Technology, vol. 59, (1999), no. 11, pp. 1625–1640. 10.1016/S0266-3538(99)00024-X
XXVIII. R. Hu and J. Lim, “Fabrication And Mechanical Properties Of Completely Biodegradable Hemp Fiber Reinforced Polylactic Acid Composites,” Journal of Composite Materials, vol. 41, (2007), no. 13, pp. 1655–1669. 10.1177/0021998306069878
XXIX. S. D. Salman, Z. Leman, M. T. H. Sultan, M. R. Ishak, and F. Cardona, “Effect Of Kenaf Fibers On Trauma Penetration Depth And Ballistic Impact Resistance For Laminated Composites,” Textile Research Journal, vol. 87, (2017), no. 17, pp. 2051–2065. 10.1177/0040517516663155
XXX. S. Luo and A. N. Netravali, “Mechanical And Thermal Properties Of Environment-Friendly Green Composites Made From Pineapple Leaf Fibers And Poly(Hydroxybutyrate-Co-Valerate) Resin,” Polymer Composites, vol. 20, (1999), no. 3, pp. 367–378. 10.1002/pc.10363
XXXI. S. Luo and A. N. Netravali, “Interfacial And Mechanical Properties Of Environment-Friendly Green Composites Made From Pineapple Fibers And Poly(Hydroxybutyrate-Co-Valerate) Resin,” Journal of Materials Science, vol. 34, (1999), no. 15, pp. 3709–3719. 10.1023/A:1004659507231
XXXII. S. Ochi, “Mechanical Properties Of Kenaf Fibers And Kenaf/Pla Composites,” Mechanics of Materials, vol. 40, (2008), no. 4-5, pp. 446–452. 10.1016/j.mechmat.2007.10.006
XXXIII. S. O. Han, D. Cho, W. H. Park, and L. T. Drzal, “Henequen/Poly(Butylene Succinate) Bio-Composites: Electron Beam Irradiation Effects On Henequen Fiber And The Interfacial Properties Of Bio-Composites, “Composite Interfaces, vol. 13, (2006), no. 2-3, pp. 231–247. 10.1163/156855406775997123
XXXIV. V. R. Simkins, A. Alderson, P. J. Davies, and K. L. Alderson, “Single Fibre Pullout Tests On Auxetic Polymeric Fibres,” Journal of Materials Science, vol. 40, (2005), no. 16, pp. 4355–4364. 10.1007/s10853-005-2829-3
XXXV. Wai, H. Y., “Particleboards Derived From Rattan Fibre Waste”, Universities Research Journal, vol. 4, no. 3, 2011. https://www.doc-developement-durable.org/file/Culture/Arbres
XXXVI. W. P. Boshoff, V. Mechtcherine, and G. P. van Zijl, “Characterising The Time-Dependent Behaviour On The Single Fibre Level Of SHCC: Part 1: Mechanism Of Fibre Pull-Out Creep,” Cement and Concrete Research, vol. 39, (2009), no. 9, pp. 779–786. 10.1016/j.cemconres.2009.06.007
XXXVII. Wollerdorfer, M., and Bader, H., “Influence Of Natural Fibres On The Mechanical Properties Of Biodegradable Polymers,” Industrial Crops and Products, vol. 8, no. 2, (1998), pp. 105-112. 10.1016/S0926-6690(97)10015-2
XXXVIII. Yaakob, M. Y., Saion, M. P. and Husin, M. A., “potential of hybrid natural/synthetic fibres for ballistic resistance: a review,” Technology Reports of Kansai University, vol. 62, no. 07, (2020), pp. 3447-3459. https://www.kansaiuniversityreports.com/article/potential-of-hybrid-natural-synthetic-fibers-for-ballistic-resistance-a-review
XXXIX. Yaakob, M. Y., Saion, M. P. and Husin, M. A., “Potency Of Natural And Synthetic Composites For Ballistic Resistance: A Review,” Applied Research and Smart Technology (ARSTech), vol. 1, no. 2, (2020), pp. 43-55. 10.23917/arstech.v1i2.52