Archive

COMPARATIVE STATISTICAL ANALYSIS AND PREPROCESSING USING MIT-BIH ARRHYTHMIA DATABASE AND AD8232

Authors:

Tribedi Sarma, Rajkishur Mudoi

DOI NO:

https://doi.org/10.26782/jmcms.2026.11.00008

Abstract:

Electrocardiogram (ECG) signals are extensively used for the diagnosis of patients and the detection of cardiovascular abnormalities. However, acquired ECG signals from patients are often influenced by noise, baseline drift, DC offset, and amplitude fluctuations, which may affect the processing of the signal for further analysis. This study presents a hardware-based ECG acquisition and analysis framework that includes an AD8232 ECG sensor and an Arduino Nano. ECG signals are acquired from six participants and transferred to a Python-based software environment for further analysis. The acquired ECG signals collected from both hardware and the MIT-BIH Arrhythmia Database are standardized and normalized, followed by DC offset removal and Butterworth band-pass filtering with a frequency range of 0.5–40 Hz. These preprocessing steps will reduce baseline wander and high-frequency noise while retaining the major components of the ECG waveform. The ECG waveforms from both data sources are visualized at each processing stage, and statistical analysis is performed on the processed signals. The proposed framework provides an integrated approach for hardware-based ECG acquisition, signal preprocessing, visualization, and statistical analysis using both real-world and benchmark ECG data.

Keywords:

ECG,MIT-BIH Arrhythmia Database,AD8232,Arduino Nano,ECG Signal Processing,DC Offset Removal,Butterworth Filter.,

References:

I. Abdrasulova, N., et al. "Butterworth Filtering at 500 Hz Optimizes PPG-Based Heart Rate Variability Analysis for Wearable Devices: A Comparative Study." Sensors, vol. 25, no. 22, 2025, article 7091, pp. 1-21. 10.3390/s25227091.
II. Abed, N. J., and E. B. A. Hussein. "Design and Implementation of Real Time Health Care Monitoring System Based on IoT." Journal of Physics: Conference Series, vol. 1818, no. 1, 2021, article 012044, 1-10. 10.1088/1742-6596/1818/1/012044.
III. Dündar, Ö., and S. Koçer. "Portable ECG Device for Continuous Heart Health Monitoring and Machine Learning Approaches for Arrhythmia Classification." International Journal of 3D Printing Technologies and Digital Industry, vol. 9, no. 3, 2025, pp. 737-51. 10.46519/ij3dptdi.1814384.
IV. Efunbote, M. I., et al. "Design and Development of Smart Patient Health Monitoring System Using ECG." Moshood Abiola Polytechnic Journal of Women in Technical Education & Employment, vol. 1, no. 1, 2023, pp. 1-10.
V. Falhi, H. M., and K. K. Hussain. "Design an Intelligent Real Time ECG Monitoring System Using Convolution Neural Network." Revue d'Intelligence Artificielle, vol. 37, no. 2, 2023, pp. 323-29. 10.18280/ria.370210.
VI. Frąk, W., et al. "Pathophysiology of Cardiovascular Diseases: New Insights into Molecular Mechanisms of Atherosclerosis, Arterial Hypertension, and Coronary Artery Disease." Biomedicines, vol. 10, no. 8, 2022, article 1938. 10.3390/biomedicines10081938.
VII. Freudenberg, J., et al. "Evaluation of Real-Time Preprocessing Methods in AI-Based ECG Signal Analysis." 2025 IEEE World AI IoT Congress (AIIoT), 2025, pp. 861-68. 10.1109/AIIoT65859.2025.11105222.
VIII. Gupta, S., et al. "HeartBeatAI: An Interpretable and Robust Deep Learning Framework for Multi-Label ECG Arrhythmia Detection." arXiv, 2026. 10.48550/arXiv.2605.24588.
IX. Harris, C. R., et al. "Array Programming with NumPy." Nature, vol. 585, no. 7825, 2020, pp. 357-62. 10.1038/s41586-020-2649-2.
X. Hasini, B. A., et al. "Real-Time ECG Monitoring System Using AD8232 Sensor and Arduino UNO for Biomedical Applications." Proceedings of the 1st International Conference on Research and Development in Information, Communication, and Computing Technologies (ICRDICCT), 2025, pp. 113-18. 10.5220/0013892900004919.
XI. He, C., et al. "Wearable Single-Lead ECG Detects Fine-Grained Structural Heart Disease Through Echo-Report Supervision." arXiv, 2026. 10.48550/arXiv.2606.09332.
XII. Heaney, J., et al. "Internet of Things-Based ECG and Vitals Healthcare Monitoring System." Micromachines, vol. 13, no. 12, 2022, article 2153. 10.3390/mi13122153.
XIII. Mantravadi, A., et al. "CLINet: A Novel Deep Learning Network for ECG Signal Classification." Journal of Electrocardiology, vol. 83, 2024, pp. 41-48. 10.1016/j.jelectrocard.2024.01.004.
XIV. Panwar, A., et al. "Integrated Portable ECG Monitoring System with CNN Classification for Early Arrhythmia Detection." Frontiers in Digital Health, vol. 7, 2025, article 1535335, pp. 1-13. 10.3389/fdgth.2025.1535335.
XV. Pollard, T., et al. "PhysioNet as a Global Platform for Biomedical Research." Nature Health, vol. 1, 2026, pp. 792- 795. 10.1038/s44360-026-00096-z.
XVI. Sharma, S., et al. "Design and Implementation of Portable ECG Monitoring System Using ESP32 and Web-Based Visualization." International Journal of Creative Research Thoughts, vol. 13, 2025, pp. 34-82.
XVII. Virtanen, P., et al. "SciPy 1.0: Fundamental Algorithms for Scientific Computing in Python." Nature Methods, vol. 17, no. 3, 2020, pp. 261-72. 10.1038/s41592-019-0686-2.
XVIII. Xu, Z., et al. "Multimodality Data Augmentation Network for Arrhythmia Classification." International Journal of Intelligent Systems, vol. 2024, 2024, article 9954821, pp. 1-14. 10.1155/2024/9954821.

XIX. Zhou, F., and D. Fang. "Multimodal ECG Heartbeat Classification Method Based on a Convolutional Neural Network Embedded with FCA." Scientific Reports, vol. 14, no. 1, 2024, article 59311, pp. 1-10. 10.1038/s41598-024-59311-0.
XX. Zishan, M. A., et al. "Dense Neural Network Based Arrhythmia Classification on Low-Cost and Low-Compute Micro-Controller." Expert Systems with Applications, vol. 239, 2024, article 122560, pp. 1-12. 10.1016/j.eswa.2023.122560.

View Download

PROCESS-NODE SCALING OF A LIGHTWEIGHT AES CIPHER ON RECONFIGURABLE HARDWARE: IMPLEMENTATION AND ANALYTICAL POWER MODELLING ON 16 NM ULTRASCALE+ FPGAS FOR IOT SECURITY

Authors:

Keshav Kumar, Javalkar Dinesh Kumar, R. Dheivanai, Tripti Kunj, Vivek Kumar

DOI NO:

https://doi.org/10.26782/jmcms.2026.11.00009

Abstract:

Background: Lightweight block ciphers on reconfigurable hardware are a leading route to securing resource-constrained Internet of Things (IoT) nodes. A Lightweight Advanced Encryption Standard (LAES) that removes the MixColumns transformation has previously been shown to deliver large area and power savings on 28 nm FPGAs. Whether those savings survive migration to a modern FinFET process, and how the balance between dynamic and static power shifts across process nodes, has not been studied for this class of datapath. Objective: This paper presents the first implementation of the LAES datapath on 16 nm UltraScale+ fabric, on a Kintex UltraScale+ and a Zynq UltraScale+ device, and develops a validated analytical power model that enables a quantitative cross-node comparison against the published 28 nm Kintex-7 and Spartan-7 baselines, together with a corrected account of the register architecture and of the security properties of the specified round function. Methods: The LAES datapath, ten unrolled SubBytes–ShiftRows–AddRoundKey rounds placed between a 128-bit input register and a 128-bit output register (256 flip-flops, no inter-round registers), is described in Verilog HDL and taken through Xilinx Vivado on both UltraScale+ devices. Power is characterised at five clock periods from 1 ns to 20 ns with component-level resolution (clocks, signals, logic, I/O and static). A linear power model P(f) = k·f + P0 is extracted per device, and P0 and k are decomposed into device static, frequency-independent I/O, I/O switching and datapath switching terms by fitting every power component separately. Closed-form expressions for energy per encrypted bit, throughput efficiency and node-crossover frequencies are derived. The diffusion of the specified round function is re-examined with a bit-exact software reference model. Results: The model reproduces measured total power with a worst-case error of 0.05%. Migrating from 28 nm to 16 nm reduces the aggregate energy per clock cycle by 11.4% on the Kintex pair (5.175 nJ to 4.586 nJ) and 20.8% on the value pair (5.246 nJ to 4.155 nJ) but raises the frequency-independent floor by 4.3× and 6.1×. Component fits show that this floor comprises 450 mW of device static power plus a 37 mW I/O offset on Kintex UltraScale+ (562 mW plus 30 mW on Zynq UltraScale+). Total power crosses over at 634 MHz (Kintex pair) and 454 MHz (value pair); these nominal crossovers lie above the clock that the unregistered ten-round cascade can sustain. At the 1 ns operating point the model gives 37.1 pJ/bit for the Zynq UltraScale+. I/O accounts for 46% to 54% of dynamic power on both 16 nm devices, and the datapath switching energy is only 2.26 to 2.45 nJ per block. Without MixColumns, a single-byte input difference never activates more than one byte in any round, the single-bit avalanche is 3.13% rather than the previously reported 49.8%, and 256 chosen plaintexts recover the complete encryption function. Conclusions: Process migration alone does not make this datapath more energy-efficient: it trades a lower switching energy against a higher device-level static floor, and the older 28 nm node remains preferable in the low-to-mid frequency regime where most IoT gateways operate. LAES as specified provides no inter-byte diffusion and must not be used for confidentiality; the results characterise the implementation cost of an AES-derived round datapath, and the methodology transfers directly to variants that restore a diffusion layer.

Keywords:

FPGA,UltraScale+,Lightweight Cryptography,IoT Security,Power Modelling,Process-Node Scaling,Energy per Bit,LAES,

References:

I. Aditya, Y., and Keshav Kumar. "Implementation of High-Performance AES Crypto Processor for Green Communication." Telematique, vol. 21, no. 1, 2022, pp. 6808–16.
II. Aditya, Y., and Keshav Kumar. "Implementation of Novel Power Efficient AES Design on High Performance FPGA." NeuroQuantology, vol. 20, no. 10, 2022, p. 5815.
III. Ahmed, Salman, et al. "Lightweight AES Design for IoT Applications: Optimizations in FPGA and ASIC with DFA Countermeasure Strategies." IEEE Access, vol. 13, 2025, pp. 22489–509. 10.1109/ACCESS.2025.3533611.
IV. Balan, N. Siva, and B. S. Murugan. "Low Area FPGA Implementation of AES Architecture with EPRNG for IoT Application." Journal of Electronic Testing, vol. 38, no. 2, 2022, pp. 181–93. 10.1007/s10836-022-05997-x.
IV. Beaulieu, Ray, et al. "The SIMON and SPECK Families of Lightweight Block Ciphers." IACR Cryptology ePrint Archive, Report 2013/404, 2013. https://eprint.iacr.org/2013/404.
V. Bisht, Neeraj, Bishwajeet Pandey, and Sandeep Kumar Budhani. "Comparative Performance Analysis of AES Encryption Algorithm for Various LVCMOS on Different FPGAs." World Journal of Engineering, vol. 20, no. 4, 2023, pp. 669–80. 10.1108/WJE-05-2021-0281.
VI. Bogdanov, Andrey, et al. "PRESENT: An Ultra-Lightweight Block Cipher." Cryptographic Hardware and Embedded Systems – CHES 2007, Lecture Notes in Computer Science, vol. 4727, Springer, 2007, pp. 450–66. 10.1007/978-3-540-74735-2_31.
VII. Brahmaiah, V. Priyanka, et al. "Implementation of AES Algorithm." Proceedings of the International Conference on Information and Communication Technology for Intelligent Systems, Springer Nature Singapore, 2023, pp. 161–71.
IX. Daemen, Joan, and Vincent Rijmen. The Design of Rijndael: AES – The Advanced Encryption Standard. Springer, 2002. 10.1007/978-3-662-04722-4.
X. Equihua, Christian, et al. "A Low-Cost and Highly Compact FPGA-Based Encryption/Decryption Architecture for AES Algorithm." IEEE Latin America Transactions, vol. 19, no. 9, 2021, pp. 1443–50. 10.1109/TLA.2021.9468436.
XI. Khan, Abdullah Ayub, et al. "Internet of Things (IoT) Security with Blockchain Technology: A State-of-the-Art Review." IEEE Access, vol. 10, 2022, pp. 122679–95. 10.1109/ACCESS.2022.3223370.
XII. Kumar, Keshav, K. R. Ramkumar, and Amanpreet Kaur. "A Design Implementation and Comparative Analysis of Advanced Encryption Standard (AES) Algorithm on FPGA." Proceedings of the 8th International Conference on Reliability, Infocom Technologies and Optimization (ICRITO), IEEE, 2020, pp. 182–85.
XIII. Kumar, Keshav, et al. "A Design of Power-Efficient AES Algorithm on Artix-7 FPGA for Green Communication." Proceedings of the International Conference on Technological Advancements and Innovations (ICTAI), IEEE, 2021, pp. 561–64. 10.1109/ICTAI53825.2021.9673435.
XIV. Kumar, Keshav, Chinnaiyan Ramasubramanian, and Bishwajeet Pandey. "Efficient FPGA Realization of Lightweight AES for Low-Power IoT Security Systems." Journal of Mechanics of Continua and Mathematical Sciences, vol. 21, no. 1, 2026, pp. 65–79. 10.26782/jmcms.2026.01.00004.
XV. Kumar, Keshav, K. R. Ramkumar, and Amanpreet Kaur. "A Lightweight AES Algorithm Implementation for Encrypting Voice Messages Using Field Programmable Gate Arrays." Journal of King Saud University – Computer and Information Sciences, vol. 34, no. 6, 2022, pp. 3878–85. 10.1016/j.jksuci.2020.08.005.
XVI. Kumar, Keshav, Chinnaiyan Ramasubramanian, and Bishwajeet Pandey. "Low Area Design and Implementation of Lightweight Encryption Algorithm on FPGA for IoT Devices." Proceedings of the IEEE 4th International Conference on AI in Cybersecurity (ICAIC), 2025, pp. 1–4. 10.1109/ICAIC63015.2025.10849186.
XVII. Kumar, Thanikodi Manoj, et al. "A Low Area High Speed FPGA Implementation of AES Architecture for Cryptography Application." Electronics, vol. 10, no. 16, 2021, p. 2023. 10.3390/electronics10162023.
XVIII. Maazouz, Mohamed, et al. "FPGA Implementation of a Chaos-Based Image Encryption Algorithm." Journal of King Saud University – Computer and Information Sciences, vol. 34, no. 10, 2022, pp. 9926–41. 10.1016/j.jksuci.2021.12.022.
XIX. Mohd, Bassam Jamil, and Thaier Hayajneh. "Lightweight Block Ciphers for IoT: Energy Optimization and Survivability Techniques." IEEE Access, vol. 6, 2018, pp. 35966–78. 10.1109/ACCESS.2018.2848586.
XX. National Institute of Standards and Technology. Advanced Encryption Standard (AES). Federal Information Processing Standards Publication 197, 2001. 10.6028/NIST.FIPS.197.
XXI. National Institute of Standards and Technology. Status Report on the Final Round of the NIST Lightweight Cryptography Standardization Process. NIST Interagency Report 8454, 2023. 10.6028/NIST.IR.8454.
XXII. Pandey, Bishwajeet, et al. "Energy-Efficient Implementation of AES Algorithm on 16nm FPGA." Proceedings of the 10th IEEE International Conference on Communication Systems and Network Technologies (CSNT), 2021, pp. 740–44.
XXIII. Pandey, Bishwajeet, et al. "Increasing Cyber Security by Energy Efficient Implementation of DES Algorithms on FPGA." Journal of Green Engineering, vol. 11, no. 10, 2021, pp. 72–82.
XXIV. Rana, Muhammad, Quazi Mamun, and Rafiqul Islam. "Lightweight Cryptography in IoT Networks: A Survey." Future Generation Computer Systems, vol. 129, 2022, pp. 77–89. 10.1016/j.future.2021.11.011.
XXV. Sawant, Anil Gopal, Vilas N. Nitnaware, and Anupama A. Deshpande. "Spartan-6 FPGA Implementation of AES Algorithm." ICCCE 2019, Lecture Notes in Electrical Engineering, vol. 570, Springer Singapore, 2020, pp. 205–11. 10.1007/978-981-13-8715-9_26.
XXVI. Sreekanth, Muttuluru, and R. K. Jeyachitra. "Implementation of Area-Efficient AES Using FPGA for IoT Applications." International Journal of Embedded Systems, vol. 15, no. 4, 2022, pp. 354–62. 10.1504/IJES.2022.125446.
XXVII. Thabit, Fursan, et al. "Cryptography Algorithms for Enhancing IoT Security." Internet of Things, vol. 22, 2023, p. 100759. 10.1016/j.iot.2023.100759.
XXVIII. Thind, Vandana, Bishwajeet Pandey, and D. M. Akbar Hussain. "Power Analysis of Energy Efficient DES Algorithm and Implementation on 28nm FPGA." Proceedings of the IEEE CSE/EUC/DCABES, 2016, pp. 600–03. 10.1109/CSE-EUC-DCABES.2016.247.
XXIX. Yang, C.-H., and Y.-S. Chien. "FPGA Implementation and Design of a Hybrid Chaos-AES Color Image Encryption Algorithm." Symmetry, vol. 12, no. 2, 2020, p. 189. 10.3390/sym12020189.

View Download

IMPACT OF PROBABILITY DISTRIBUTION SELECTION ON TRANSPORTATION COST AND RISK IN STOCHASTIC TRANSPORTATION PROBLEMS

Authors:

Amarjit Singh, Amarinder Singh

DOI NO:

https://doi.org/10.26782/jmcms.2026.11.00010

Abstract:

Transportation problems help in making smart choices in logistics, supply chains, and modern transport systems. At their core, they play a huge role in balancing economic factors, addressing social needs, and keeping our transit networks safe and secure. However, in the real world, several parameters become uncertain, making it harder to determine reliable transportation plans. This study presents an ambiguity-bounded framework for a chance-constrained Stochastic Classical Transportation Problem (SCTP) that handles demand uncertainty. The historical demand at each destination is examined by fitting four candidate distributions, namely, Normal, Lognormal, Gamma, and Weibull. The most appropriate distribution is selected through the information criteria, i.e., Akaike Information Criterion and Bayesian Information Criterion, and the goodness-of-fit test, i.e., the Kolmogorov-Smirnov test. Worst-case marginal quantiles from these ambiguity sets are then used to convert stochastic demands into deterministic equivalents across various confidence levels, and the ensuing transportation problems are optimally solved. The effects of distribution selection on demand estimates and transportation costs are investigated through extensive Monte Carlo simulations. The study also evaluates the Value-at-Risk and Conditional Value-at-Risk to compute the contingency and worst-case budget requirements under extreme demand scenarios. The findings show that while multiple distributions provide an adequate statistical fit and yield similar demand estimates in many cases, their tail- risk behaviours diverge significantly. Specifically, the ambiguity-bounded consensus envelope approach excels at limiting extreme cost outcomes and producing more reliable worst-case budget estimates. Summarily, the framework provides decision-makers with systematic tools to assess contingencies, manage risk, and execute dynamic transportation planning under uncertainty.

Keywords:

Stochastic transportation problem,Chance-constrained programming,Distribution fitting,AIC,BIC,Demand uncertainty,Simulations.,

References:

I. Acharya, Srikumar, et al. “Computation of a Multi-Objective Fuzzy Stochastic Transportation Problem.” International Journal of Fuzzy Computation and Modelling, vol. 1, no. 2, 2014, pp. 212–233. 10.1504/IJFCM.2014.067129.
II. Agrawal, P., and T. Ganesh. “Multi-Choice Stochastic Transportation Problem Involving Logistic Distribution.” Advances and Applications in Mathematical Sciences, vol. 18, no. 1, 2018, pp. 45–58. https://www.mililink.com/upload/article/1203372211aams_vol_181_nov_2018_a4_p45-58_prachi_agrawal_and_talari_ganesh.pdf.
III. Agrawal, P., et al. “An Artificial Intelligence Approach for Solving Stochastic Transportation Problems.” Computers, Materials & Continua, vol. 70, no. 1, 2022, pp. 817–829. https://doi.org/10.32604/cmc.2022.019685.
IV. Akaike, Hirotugu. “A New Look at the Statistical Model Identification.” IEEE Transactions on Automatic Control, vol. 19, no. 6, 1974, pp. 716–723. https://doi.org/10.1109/TAC.1974.1100705.
V. Al Qahtani, Hadeel, et al. “A Goal Programming Approach to Multichoice Multiobjective Stochastic Transportation Problems with Extreme Value Distribution.” Advances in Operations Research, vol. 2019, 2019, article 9714137. 10.1155/2019/9714137.
VI. Ashour, Marwan Abdul Hameed, Alyaa Abdulameer Ahmed, and Ammar Sh. Ahmed. “Optimization Algorithms for Transportation Problems with Stochastic Demand.” Periodicals of Engineering and Natural Sciences, vol. 10, no. 3, 2022, pp. 172–179. https://doi.org/10.21533/pen.v10.i3.654.
VII. Bellman, Richard E., and Lotfi A. Zadeh. “Decision-Making in a Fuzzy Environment.” Management Science, vol. 17, no. 4, 1970, pp. B-141–B-164. https://doi.org/10.1287/mnsc.17.4.B141.
VIII. Bhavana, Pulloru, and D. Kalpana Priya. “The Stochastic Transportation Problem with Imprecise Data Using Lomax Distribution.” European Journal of Pure and Applied Mathematics, vol. 17, no. 2, 2024, pp. 1228–1243. 10.29020/nybg.ejpam.v17i2.5162.
IX. Gupta, Srikant, Harish Garg, and Sachin Chaudhary. “Parameter Estimation and Optimization of Multi-Objective Capacitated Stochastic Transportation Problem for Gamma Distribution.” Complex & Intelligent Systems, vol. 6, 2020, pp. 651–667. 10.1007/s40747-020-00156-1.
X. Hitchcock, Frank L. “The Distribution of a Product from Several Sources to Numerous Localities.” Journal of Mathematics and Physics, vol. 20, nos. 1–4, 1941, pp. 224–230. 10.1002/sapm1941201224.
XI. Johnson, Norman L., Samuel Kotz, and Narayanaswamy Balakrishnan. “Continuous Univariate Distributions.” 2nd ed., vol. 1, Wiley, 1994. https://www.wiley-vch.de/en/areas-interest/mathematics-statistics/continuous-univariate-distributions-978-0-471-58495-7.
XII. Joshi, Vishwas Deep, Medha Sharma, and Jagdev Singh. “Solving Multi-Choice Solid Stochastic Multi-Objective Transportation Problem with Supply, Demand and Conveyance Capacity Involving Newton Divided Difference Interpolations.” Journal of Computational Analysis and Applications, vol. 33, no. 1A, 2024, pp. 372–395. https://eudoxuspress.com/index.php/pub/article/view/30.
XIII. Mahapatra, Deshabrata Roy, Sankar Kumar Roy, and M. P. Biswal. “Multi-Choice Stochastic Transportation Problem Involving Extreme Value Distribution.” Applied Mathematical Modelling, vol. 37, no. 4, 2013, pp. 2230–2240. 10.1016/j.apm.2012.04.024.
XIV. Mahapatra, Deshabrata Roy, Sankar Kumar Roy, and M. P. Biswal. “Multi-Objective Stochastic Transportation Problem Involving Log-Normal.” Journal of Physical Sciences, vol. 14, 2010, pp. 63–76. Art7-libre.pdf
XV. Rockafellar, R. Tyrrell, and Stanislav Uryasev. “Optimization of Conditional Value-at-Risk.” The Journal of Risk, vol. 2, no. 3, 2000, pp. 21–41. 10.21314/JOR.2000.038.
XVI. Roy, Sankar Kumar, Deshabrata Roy Mahapatra, and M. P. Biswal. “Multi-Choice Stochastic Transportation Problem with Exponential Distribution.” Journal of Uncertain Systems, vol. 6, no. 3, 2012, pp. 200–213. Journal of Uncertain Systems, Vol1 No3, 2007, August, World Academic Union (World Academic Press)
XVII. Roy, Sankar Kumar. “Multi-Choice Stochastic Transportation Problem Involving Weibull Distribution.” International Journal of Operational Research, vol. 21, no. 1, 2014, pp. 38–58. Multi-choice stochastic transportation problem involving Weibull distribution International Journal of Operational Research
XVIII. Roy, Sankar Kumar. “Transportation Problem with Multi-Choice Cost and Demand and Stochastic Supply.” Journal of the Operations Research Society of China, vol. 4, no. 2, 2016, pp. 193–204. 10.1007/s40305-016-0125-3.
XIX. Rubinstein, Reuven Y., and Dirk P. Kroese. “Simulation and the Monte Carlo Method.” 3rd ed., Wiley, 2016. 10.1002/9781118631980.
XX. Schwarz, Gideon. “Estimating the Dimension of a Model.” The Annals of Statistics, vol. 6, no. 2, 1978, pp. 461–464. 10.1214/aos/1176344136.
XXI. Singh, S., A. Pradhan, and M. P. Biswal. “Multi-Objective Solid Transportation Problem under Stochastic Environment.” Sādhanā, vol. 44, no. 5, 2019, article 105. 10.1007/s12046-019-1094-0.
XXII. Stephens, M. A. “EDF Statistics for Goodness of Fit and Some Comparisons.” Journal of the American Statistical Association, vol. 69, no. 347, 1974, pp. 730–737. 10.1080/01621459.1974.10480196.
XXIII. Taha, Hamdy A. “Operations Research: An Introduction.” Pearson Education, 2013. https://books.google.com/books?vid=ISBN9789332518223.
XXIV. Williams, A. C. “A Stochastic Transportation Problem.” Operations Research, vol. 11, no. 5, 1963, pp. 759–770. 10.1287/opre.11.5.759.

View Download