PROCESS-NODE SCALING OF A LIGHTWEIGHT AES CIPHER ON RECONFIGURABLE HARDWARE: IMPLEMENTATION AND ANALYTICAL POWER MODELLING ON 16 NM ULTRASCALE+ FPGAS FOR IOT SECURITY

Authors:

Keshav Kumar,Javalkar Dinesh Kumar,R. Dheivanai,Tripti Kunj,Vivek Kumar,

DOI NO:

https://doi.org/10.26782/jmcms.2026.11.00009

Keywords:

FPGA,UltraScale+,Lightweight Cryptography,IoT Security,Power Modelling,Process-Node Scaling,Energy per Bit,LAES,

Abstract

Background: Lightweight block ciphers on reconfigurable hardware are a leading route to securing resource-constrained Internet of Things (IoT) nodes. A Lightweight Advanced Encryption Standard (LAES) that removes the MixColumns transformation has previously been shown to deliver large area and power savings on 28 nm FPGAs. Whether those savings survive migration to a modern FinFET process, and how the balance between dynamic and static power shifts across process nodes, has not been studied for this class of datapath. Objective: This paper presents the first implementation of the LAES datapath on 16 nm UltraScale+ fabric, on a Kintex UltraScale+ and a Zynq UltraScale+ device, and develops a validated analytical power model that enables a quantitative cross-node comparison against the published 28 nm Kintex-7 and Spartan-7 baselines, together with a corrected account of the register architecture and of the security properties of the specified round function. Methods: The LAES datapath, ten unrolled SubBytes–ShiftRows–AddRoundKey rounds placed between a 128-bit input register and a 128-bit output register (256 flip-flops, no inter-round registers), is described in Verilog HDL and taken through Xilinx Vivado on both UltraScale+ devices. Power is characterised at five clock periods from 1 ns to 20 ns with component-level resolution (clocks, signals, logic, I/O and static). A linear power model P(f) = k·f + P0 is extracted per device, and P0 and k are decomposed into device static, frequency-independent I/O, I/O switching and datapath switching terms by fitting every power component separately. Closed-form expressions for energy per encrypted bit, throughput efficiency and node-crossover frequencies are derived. The diffusion of the specified round function is re-examined with a bit-exact software reference model. Results: The model reproduces measured total power with a worst-case error of 0.05%. Migrating from 28 nm to 16 nm reduces the aggregate energy per clock cycle by 11.4% on the Kintex pair (5.175 nJ to 4.586 nJ) and 20.8% on the value pair (5.246 nJ to 4.155 nJ) but raises the frequency-independent floor by 4.3× and 6.1×. Component fits show that this floor comprises 450 mW of device static power plus a 37 mW I/O offset on Kintex UltraScale+ (562 mW plus 30 mW on Zynq UltraScale+). Total power crosses over at 634 MHz (Kintex pair) and 454 MHz (value pair); these nominal crossovers lie above the clock that the unregistered ten-round cascade can sustain. At the 1 ns operating point the model gives 37.1 pJ/bit for the Zynq UltraScale+. I/O accounts for 46% to 54% of dynamic power on both 16 nm devices, and the datapath switching energy is only 2.26 to 2.45 nJ per block. Without MixColumns, a single-byte input difference never activates more than one byte in any round, the single-bit avalanche is 3.13% rather than the previously reported 49.8%, and 256 chosen plaintexts recover the complete encryption function. Conclusions: Process migration alone does not make this datapath more energy-efficient: it trades a lower switching energy against a higher device-level static floor, and the older 28 nm node remains preferable in the low-to-mid frequency regime where most IoT gateways operate. LAES as specified provides no inter-byte diffusion and must not be used for confidentiality; the results characterise the implementation cost of an AES-derived round datapath, and the methodology transfers directly to variants that restore a diffusion layer.

Refference:

I. Aditya, Y., and Keshav Kumar. "Implementation of High-Performance AES Crypto Processor for Green Communication." Telematique, vol. 21, no. 1, 2022, pp. 6808–16.
II. Aditya, Y., and Keshav Kumar. "Implementation of Novel Power Efficient AES Design on High Performance FPGA." NeuroQuantology, vol. 20, no. 10, 2022, p. 5815.
III. Ahmed, Salman, et al. "Lightweight AES Design for IoT Applications: Optimizations in FPGA and ASIC with DFA Countermeasure Strategies." IEEE Access, vol. 13, 2025, pp. 22489–509. 10.1109/ACCESS.2025.3533611.
IV. Balan, N. Siva, and B. S. Murugan. "Low Area FPGA Implementation of AES Architecture with EPRNG for IoT Application." Journal of Electronic Testing, vol. 38, no. 2, 2022, pp. 181–93. 10.1007/s10836-022-05997-x.
IV. Beaulieu, Ray, et al. "The SIMON and SPECK Families of Lightweight Block Ciphers." IACR Cryptology ePrint Archive, Report 2013/404, 2013. https://eprint.iacr.org/2013/404.
V. Bisht, Neeraj, Bishwajeet Pandey, and Sandeep Kumar Budhani. "Comparative Performance Analysis of AES Encryption Algorithm for Various LVCMOS on Different FPGAs." World Journal of Engineering, vol. 20, no. 4, 2023, pp. 669–80. 10.1108/WJE-05-2021-0281.
VI. Bogdanov, Andrey, et al. "PRESENT: An Ultra-Lightweight Block Cipher." Cryptographic Hardware and Embedded Systems – CHES 2007, Lecture Notes in Computer Science, vol. 4727, Springer, 2007, pp. 450–66. 10.1007/978-3-540-74735-2_31.
VII. Brahmaiah, V. Priyanka, et al. "Implementation of AES Algorithm." Proceedings of the International Conference on Information and Communication Technology for Intelligent Systems, Springer Nature Singapore, 2023, pp. 161–71.
IX. Daemen, Joan, and Vincent Rijmen. The Design of Rijndael: AES – The Advanced Encryption Standard. Springer, 2002. 10.1007/978-3-662-04722-4.
X. Equihua, Christian, et al. "A Low-Cost and Highly Compact FPGA-Based Encryption/Decryption Architecture for AES Algorithm." IEEE Latin America Transactions, vol. 19, no. 9, 2021, pp. 1443–50. 10.1109/TLA.2021.9468436.
XI. Khan, Abdullah Ayub, et al. "Internet of Things (IoT) Security with Blockchain Technology: A State-of-the-Art Review." IEEE Access, vol. 10, 2022, pp. 122679–95. 10.1109/ACCESS.2022.3223370.
XII. Kumar, Keshav, K. R. Ramkumar, and Amanpreet Kaur. "A Design Implementation and Comparative Analysis of Advanced Encryption Standard (AES) Algorithm on FPGA." Proceedings of the 8th International Conference on Reliability, Infocom Technologies and Optimization (ICRITO), IEEE, 2020, pp. 182–85.
XIII. Kumar, Keshav, et al. "A Design of Power-Efficient AES Algorithm on Artix-7 FPGA for Green Communication." Proceedings of the International Conference on Technological Advancements and Innovations (ICTAI), IEEE, 2021, pp. 561–64. 10.1109/ICTAI53825.2021.9673435.
XIV. Kumar, Keshav, Chinnaiyan Ramasubramanian, and Bishwajeet Pandey. "Efficient FPGA Realization of Lightweight AES for Low-Power IoT Security Systems." Journal of Mechanics of Continua and Mathematical Sciences, vol. 21, no. 1, 2026, pp. 65–79. 10.26782/jmcms.2026.01.00004.
XV. Kumar, Keshav, K. R. Ramkumar, and Amanpreet Kaur. "A Lightweight AES Algorithm Implementation for Encrypting Voice Messages Using Field Programmable Gate Arrays." Journal of King Saud University – Computer and Information Sciences, vol. 34, no. 6, 2022, pp. 3878–85. 10.1016/j.jksuci.2020.08.005.
XVI. Kumar, Keshav, Chinnaiyan Ramasubramanian, and Bishwajeet Pandey. "Low Area Design and Implementation of Lightweight Encryption Algorithm on FPGA for IoT Devices." Proceedings of the IEEE 4th International Conference on AI in Cybersecurity (ICAIC), 2025, pp. 1–4. 10.1109/ICAIC63015.2025.10849186.
XVII. Kumar, Thanikodi Manoj, et al. "A Low Area High Speed FPGA Implementation of AES Architecture for Cryptography Application." Electronics, vol. 10, no. 16, 2021, p. 2023. 10.3390/electronics10162023.
XVIII. Maazouz, Mohamed, et al. "FPGA Implementation of a Chaos-Based Image Encryption Algorithm." Journal of King Saud University – Computer and Information Sciences, vol. 34, no. 10, 2022, pp. 9926–41. 10.1016/j.jksuci.2021.12.022.
XIX. Mohd, Bassam Jamil, and Thaier Hayajneh. "Lightweight Block Ciphers for IoT: Energy Optimization and Survivability Techniques." IEEE Access, vol. 6, 2018, pp. 35966–78. 10.1109/ACCESS.2018.2848586.
XX. National Institute of Standards and Technology. Advanced Encryption Standard (AES). Federal Information Processing Standards Publication 197, 2001. 10.6028/NIST.FIPS.197.
XXI. National Institute of Standards and Technology. Status Report on the Final Round of the NIST Lightweight Cryptography Standardization Process. NIST Interagency Report 8454, 2023. 10.6028/NIST.IR.8454.
XXII. Pandey, Bishwajeet, et al. "Energy-Efficient Implementation of AES Algorithm on 16nm FPGA." Proceedings of the 10th IEEE International Conference on Communication Systems and Network Technologies (CSNT), 2021, pp. 740–44.
XXIII. Pandey, Bishwajeet, et al. "Increasing Cyber Security by Energy Efficient Implementation of DES Algorithms on FPGA." Journal of Green Engineering, vol. 11, no. 10, 2021, pp. 72–82.
XXIV. Rana, Muhammad, Quazi Mamun, and Rafiqul Islam. "Lightweight Cryptography in IoT Networks: A Survey." Future Generation Computer Systems, vol. 129, 2022, pp. 77–89. 10.1016/j.future.2021.11.011.
XXV. Sawant, Anil Gopal, Vilas N. Nitnaware, and Anupama A. Deshpande. "Spartan-6 FPGA Implementation of AES Algorithm." ICCCE 2019, Lecture Notes in Electrical Engineering, vol. 570, Springer Singapore, 2020, pp. 205–11. 10.1007/978-981-13-8715-9_26.
XXVI. Sreekanth, Muttuluru, and R. K. Jeyachitra. "Implementation of Area-Efficient AES Using FPGA for IoT Applications." International Journal of Embedded Systems, vol. 15, no. 4, 2022, pp. 354–62. 10.1504/IJES.2022.125446.
XXVII. Thabit, Fursan, et al. "Cryptography Algorithms for Enhancing IoT Security." Internet of Things, vol. 22, 2023, p. 100759. 10.1016/j.iot.2023.100759.
XXVIII. Thind, Vandana, Bishwajeet Pandey, and D. M. Akbar Hussain. "Power Analysis of Energy Efficient DES Algorithm and Implementation on 28nm FPGA." Proceedings of the IEEE CSE/EUC/DCABES, 2016, pp. 600–03. 10.1109/CSE-EUC-DCABES.2016.247.
XXIX. Yang, C.-H., and Y.-S. Chien. "FPGA Implementation and Design of a Hybrid Chaos-AES Color Image Encryption Algorithm." Symmetry, vol. 12, no. 2, 2020, p. 189. 10.3390/sym12020189.

View Download