Authors:
Raghavendra Prasad Nayak B,S. Krishnan,V. Diwakar Reddy,DOI NO:
https://doi.org/10.26782/jmcms.2026.11.00006Keywords:
3D printing,Fused Deposition Modeling,ABS,PLA composite,waste wood - walnut shells,Abstract
In modern manufacturing, cost-effectiveness and environmentally friendly production processes play vital roles. Among them, Additive Manufacturing (AM) and 3D printing (3DP) technologies are key drivers of material savings in manufacturing engineering. Various plastic and composite materials are suitable for 3D printing by the deposition of semi-melted materials. Unfortunately, most materials suitable for fused deposition modeling (FDM) 3D printing are non-biodegradable, petroleum-based polymers. The current ecological crisis caused by plastic waste has generated significant interest in biodegradable materials for many applications, including 3D printing. As biodegradable thermoplastics increasingly penetrate the market, filaments for FDM 3D printing and fillers in the form of natural fibers are viable. They have the clear advantage of reducing costs while retaining the biodegradable characteristics of filaments. However, most biodegradable polymers, including Polylactic Acid (PLA), have insufficient mechanical properties for many applications. One approach to overcome this challenge is to introduce additives (bio-natural chemicals) that enhance the mechanical properties and maintain FDM 3D printability. The present study focuses on eco-friendly 3D printing, which reduces environmental impact, and the feasibility of implementing biodegradable components.Refference:
I. Bano, S., et al. “Study of Surface Mechanical Characteristics of ABS/PC Blends Using Nanoindentation.” Processes, vol. 9, no. 4, 2021, p. 637, 10.3390/pr9040637.
II. Battini, D., et al. “Effects of Fiber Layout on Strength and Failure of 3D Printed Notched Composites.” Composite Structures, vol. 327, 2024, p. 117644. 10.1016/j.compstruct.2023.117644.
III. Boostan, A., et al. “Effect of Layer Thickness and Print Orientation on Surface Hardness of FDM-Printed PLA, PETG, PC.” Proceedings of International Structural Engineering and Construction, vol. 12, no. 1, 2025. 10.14455/isec.2025.12(1).mat-12.
IV. Draghici, S., et al. “Design and Fabrication of Thermoplastic Moulds for Manufacturing CFRP Composite Impeller Blades.” Materiale Plastice, vol. 57, no. 1, 2020, pp. 290–98. 10.37358/mp.20.1.5338.
V. Imran, K., et al. “Eco-Friendly 3D Printing—Biodegradable PLA Composites Reinforced with Wood Waste.” 2025, pp. 250–54. 10.1201/9781003725053-43.
VI. Jose, A. S., et al. “Investigations on Mechanical Properties of Bio-Waste Micro Particles Reinforced Phenol Formaldehyde Composites.” Archives of Metallurgy and Materials, 2022, pp. 377–84. 10.24425/amm.2022.137768.
VII. Koren, K., et al. “Investigating the Strength Recovery of Additively Manufactured Components Repaired Utilizing a 3D Printing Pen.” Research Square, 3 Aug. 2022. 10.21203/rs.3.rs-1902848/v1.
VIII. Kumar, P. Satish, et al. “A Study of Hardness and Microstructure of a Robot Deposited WAAM Component with Varying Wire Feed Rate in the Build Direction.” Journal of Mechanics of Continua and Mathematical Sciences, vol. 15, no. 7, 2020, pp. 517–28. 10.26782/jmcms.2020.07.00045.
IX. Maguluri, Nagarjuna, et al. “A Review on the Development of Customized Ankle Foot Orthosis for Foot Drop Using Additive Manufacturing Processes.” Journal of Mechanics of Continua and Mathematical Sciences, vol. 15, no. 7, 2020, pp. 661–74. 10.26782/jmcms.2020.07.00058.
X. Maheshbabu, Pidaparthy, et al. “Numerical Investigation of MWCNT/ZnO Hybrid Nanofluid Heat Performance of a Counter Flow Heat Exchanger.” Journal of Mechanics of Continua and Mathematical Sciences, vol. 20, no. 7, 2025, pp. 136–53, 10.26782/jmcms.2025.07.00008.
XI. Meenakshi, C. M., et al. “Advanced Engineering Methods for Design, Fabrication and Analysis of Hybrid Fiber Reinforced Small HAWT Blade.” Journal of Mechanics of Continua and Mathematical Sciences, Special Issue no. 2, 2019, pp. 707–19, 10.26782/jmcms.spl.2019.08.00086.
XII. Mogan, J., et al. “Fused Deposition Modelling of Polymer Composite: A Progress.” Polymers, vol. 15, no. 1, 2023, p. 28. 10.3390/polym15010028.
XIII. Mohammed, Raffi, et al. “Future Trends and Emerging Technologies in Mechanical Engineering: An Analytical Perspective.” Journal of Mechanics of Continua and Mathematical Sciences, vol. 20, no. 7, 2025, pp. 62–74. 10.26782/jmcms.2025.07.00004.
XIV. Raj, S. S., et al. “Philosophy of Selecting ASTM Standards for Mechanical Characterization of Polymers and Polymer Composites.” Materiale Plastice, vol. 58, no. 3, 2021, pp. 247–56. 10.37358/mp.21.3.5523.
XV. Sola, A. “Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next-Generation 3D Printable Thermoplastics and Composites.” Macromolecular Materials and Engineering, vol. 307, no. 10, 2022, p. 2200197. 10.1002/mame.202200197.
XVI. Song, X., et al. “Properties of Poly(lactic acid)/Walnut Shell/Hydroxyapatite Composites Prepared with Fused Deposition Modeling.” Scientific Reports, vol. 12, no. 1, 2022, p. 11563. 10.1038/s41598-022-15622-8.
XVII. Subramani, R., et al. “Exploring the Use of Biodegradable Polymer Materials in Sustainable 3D Printing.” Applied Chemical Engineering, vol. 7, no. 2, 2024, p. 3870. 10.59429/ace.v7i2.3870.
XVIII. Sultana, J., et al. “Influences of 3D Printing Parameters on the Mechanical Properties of Wood PLA Filament: An Experimental Analysis by Taguchi Method.” Progress in Additive Manufacturing, vol. 9, no. 4, 2023, pp. 1239–51. 10.1007/s40964-023-00516-6.
XIX. Suresh, Gamini, et al. “Characterization of Materials for Customized AFO Using Additive Manufacturing.” Journal of Mechanics of Continua and Mathematical Sciences, vol. 15, no. 7, 2020, pp. 587–96. 10.26782/jmcms.2020.07.00052.
XX. Wei, X., et al. “3D Printable Graphene Composite.” Scientific Reports, vol. 5, 2015, p. 11181. 10.1038/srep11181.

