Authors:
N. Vinod Kumar,F. Vincy Lloyd,DOI NO:
https://doi.org/10.26782/jmcms.2026.11.00005Keywords:
m-GDI,FinFET,Low-Power VLSI,Full Adder,4×4 Multiplier,MAC Unit,PDP,Energy-Efficient Arithmetic.,Abstract
This paper presents how the need for more efficient mathematical hardware is driving research into new Multiply-Accumulate Unit (MAC) designs that are less power-hungry, simpler, and less likely to dissipate energy. This design will be useful in various applications, including digital signal processing (DSP) and Internet of Things (IoT), edge computing, and AI accelerators. This study introduces an 18 nm FinFET-based low-power modified Gate Diffusion Input (m-GDI) arithmetic architecture. A 4×4 multiplier and a MAC unit with multiplication and accumulation phases are realized using a tiny 10-transistor m-GDI full adder as the basic arithmetic building block. Using transient simulations, the proposed circuits are developed and functionally tested in the Cadence Virtuoso environment. The 4×4 multiplier surpasses the reference designs in terms of power consumption and propagation delay, achieving an average of 1.58 µW with a duration of 43.5 ns. The proposed MAC unit exhibits a power consumption of 2.38 nW and a propagation delay of 17.72 ns, resulting in a calculated power-delay product (PDP) of 42.18 fJ. The proposed design results offer lower power consumption, area, PDP, and circuit complexity while keeping the delay performance comparable. The results confirm the feasibility of developing compact, power-efficient arithmetic units for very large-scale integration (VLSI) systems using the proposed m-GDI-FinFET technique.Refference:
I. Akshat Yadav, G. Isame, P. Sonawane, and S. Mane, (2025) “Design and Analysis of a Low-Power Full Adder in 90-nm CMOS Technology,” International Journal of Innovative Science and Research Technology, vol. 10, no. 5, 2025. 10.38124/ijisrt/25may2196
II. Amgoth Laxman, N. Siva Sankara Reddy,” (2023) Design and implementation of hybrid logic based MAC unit using 45 nm technology” e-Prime – Advances in Electrical Engineering, Electronics and Energy 6 (2023) 100317 DOI: 10.1016/j.prime.2023.100317
III. Aguirre-Hernandez, Mariano, and Monico Linares-Aranda.(2010) "CMOS full-adders for energy-efficient arithmetic applications." IEEE transactions on very large scale integration (VLSI) systems 19.4 (2010): 718-721. 10.1109/TVLSI.2009.2038166
IV. Aranda, Monico Linares, Ramon Báez, and Oscar Gonzalez Diaz.(2010) "Hybrid adders for high-speed arithmetic circuits: A comparison." 2010 7th International Conference on Electrical Engineering Computing Science and Automatic Control. IEEE, 2010. 10.1109/ICEEE.2010.5608566
V. Asif, Shahzad, and Yinan Kong.(2015) "Analysis of different architectures of counter based Wallace multipliers." 2015 Tenth International Conference on Computer Engineering & Systems (ICCES). IEEE, 2015. 10.1109/ICCES.2015.7393034
VI. Anjaneyulu, Onteru, and CV Krishna Reddy.(2023) "A novel design of full adder cell for VLSI applications." International Journal of Electronics 110.4 (2023): 670-685. 10.1080/00207217.2022.2059819
VII. Alioto, Massimo, Giuseppe Di Cataldo, and Gaetano Palumbo.(2007) "Mixed full adder topologies for high-performance low-power arithmetic circuits." Microelectronics Journal 38.1 (2007): 130-139. 10.1016/j.mejo.2006.09.001
VIII. Bouchakour, Mohamed, et al.(2025) "A Low Power Fully Analog MAC Operation Using Standard CMOS Technology for Neural Network Inference." 2025 23rd IEEE Interregional NEWCAS Conference (NEWCAS). IEEE, 2025. 10.1109/NewCAS64648.2025.11106966
IX. Chang, Chip Hong, Jiang Min Gu, and Mingyan Zhang.(2005) "A review of 0.18-µm full adder performances for tree." IEEE transactions on very large scale integration (VLSI) 13.6 (2005). 10.1109/TVLSI.2005.848806
X. Devika, B., et al. (2024) "Performance analysis of an energy efficient 1-bit hybrid full adder." 2024 2nd International Conference on Networking, Embedded and Wireless Systems (ICNEWS). IEEE, 2024. 10.1109/ICNEWS60873.2024.10730821
XI. Fritz, Christopher, and Adly T. Fam.(2017) "Fast binary counters based on symmetric stacking." IEEE Transactions on Very Large Scale Integration (VLSI) Systems 25.10 (2017): 2971-2975. 10.1109/TVLSI.2017.2723475
XII. Goel, Sumeer, Ashok Kumar, and Magdy A. Bayoumi.(2006) "Design of robust, energy-efficient full adders for deep-submicrometer design using hybrid-CMOS logic style." IEEE Transactions on Very Large Scale Integration (VLSI) Systems 14.12 (2006): 1309-1321. 10.1109/TVLSI.2006.887807
XIII. Hassoune, Ilham, et al.(2008) "ULPFA: A new efficient design of a power-aware full adder." IEEE Transactions on Circuits and Systems I: Regular Papers 57.8 (2008): 2066-2074. 10.1109/TCSI.2008.2001367
XIV. Janne J. Lehtomäki ,Vishwakarma, Sudheer, Zaheer Khan,(2026) "Impact of MAC Unit Design Architectures and Their Applications in Modern Computing: An In-Depth Review." IEEE Access (2026). 10.1109/ACCESS.2026.3664183
XV. Kumar, T. Saran, et al.(2023) "Area efficient and ultra low power full adder design based on GDI technique for computing systems." International conference on cognitive computing and cyber physical systems. Cham: Springer Nature Switzerland, 2023. 10.1007/978-3-031-48891-7_5.
XVI. Kumar, Pankaj, and Rajender Kumar Sharma.(2017) "An energy efficient logic approach to implement CMOS full adder." Journal of Circuits, systems and Computers 26.05 (2017): 1750084. 10.1142/S0218126617500840
XVII. Mahendran, G. (2024)"CMOS full adder cells based on modified full swing restored complementary pass transistor logic for energy efficient high speed arithmetic applications." Integration 95 (2024): 102132. 10.1016/j.vlsi.2023.102132
XVIII. Manjunath, R. (2022)"Low power optimization of full adder circuit based on GDI logic for biomedical applications." Int J Adv Res (2022). 10.21474/IJAR01/15511
XIX. Pandimeena, R., et al.(2025) "Power-Efficient Design of Full Adder Using XOR-XNOR Logic and Input-Controlled Leakage Restrainer Transistors in 14nm CMOS Technology." 2025 Fourth International Conference on Smart Technologies, Communication and Robotics (STCR). IEEE, 2025. 10.1109/STCR62650.2025.11020250
XX. Parameshwara, M. C., and H. C. Srinivasaiah.(2017) "Low-power hybrid 1-bit full-adder circuit for energy efficient arithmetic applications." Journal of Circuits, Systems and Computers 26.01 (2017): 1750014. 10.1142/S0218126617500141
XXI. Rahman, Mohammad, et al.(2010) "Design automation tools and libraries for low power digital design." 2010 IEEE Dallas Circuits and Systems Workshop. IEEE, 2010. 10.1109/DCAS.2010.5955034
XXII. Radhakrishnan, Dayalu.(2001) "Low-voltage low-power CMOS full adder." IEE Proceedings-Circuits, Devices and Systems 148.1 (2001): 19-24. https://doi.org/10.1049/ip-cds:20010170
XXIII. Shams, Ahmed M., Tarek K. Darwish, and Magdy A. Bayoumi.(2002) "Performance analysis of low-power 1-bit CMOS full adder cells." IEEE transactions on very large scale integration (VLSI) systems 10.1 (2002): 20-29. 10.1109/92.988727
XXIV. Sharma, Sambhav, et al.(2024) "TG-in-DRAM: A Transmission Gate based Full Adder using Multi-row Activation for enhanced Throughput in CIM Architectures." 2024 IEEE Asia Pacific Conference on Circuits and Systems (APCCAS). IEEE, 2024. 10.1109/APCCAS62602.2024.10808784
XXV. Shaik, D., and S. K. S. Gollapudi.(2023) "Analogy of Distinct Constructions of FinFET GDI Full Adder." International Journal of Intelligent Systems and Applications in Engineering 11.1 (2023). https://ijisae.org/index.php/IJISAE/article/view/2484
XXVI. Shams, Ahmed M., Tarek K. Darwish, and Magdy A. Bayoumi.(2002) "Performance analysis of low-power 1-bit CMOS full adder cells." IEEE transactions on very large scale integration (VLSI) systems 10.1 (2002): 20-29. 10.1109/92.988727
XXVII. Shoba, Mohan, and Rangaswamy Nakkeeran.(2016) "GDI based full adders for energy efficient arithmetic applications." Engineering Science and Technology, an International Journal 19.1 (2016): 485-496. 10.1016/j.jestch.2015.09.006
XXVIII. Tung, Chiou-Kou, et al. (2007)"A low-power high-speed hybrid CMOS full adder for embedded system." 2007 IEEE Design and Diagnostics of Electronic Circuits and Systems. IEEE, 2007. 10.1109/DDECS.2007.4295280
XXIX. Vesterbacka, Mark. (1999)"A 14-transistor CMOS full adder with full voltage-swing nodes." 1999 IEEE Workshop on Signal Processing Systems. SiPS 99. Design and Implementation (Cat. No. 99TH8461). IEEE, 1999. 10.1109/SIPS.1999.822379
XXX. Venkatachalam, Adithya, Umadevi Seerengasamy, and Abraham Sudharson Ponraj. (2025) "A scalable automated framework for multiply-accumulate unit design in high-performance computing applications." Scientific Reports 15.1 (2025): 42713.
https://www.nature.com/articles/s41598-025-26868-3
XXXI. Wallace, Christopher S.(1964) "A suggestion for a fast multiplier." IEEE Transactions on electronic Computers 1 (1964): 14-17. 10.1109/PGEC.1964.263830
XXXII. Yin, Ningyuan, et al. (2023) "Low-power pass-transistor logic-based full adder and 8-bit multiplier." Electronics 12.15 (2023): 3209. 10.3390/electronics12153209
XXXIII. Zimmermann, Reto, and Wolfgang Fichtner.(1997) "Low-power logic styles: CMOS versus pass-transistor logic." IEEE journal of solid-state circuits 32.7 (1997): 1079-1090. 10.1109/4.597298
XXXIV. Zhang, Mingyan, Jiangmin Gu, and Chip-Hong Chang.(2003) "A novel hybrid pass logic with static CMOS output drive full-adder cell." 2003 IEEE International Symposium on Circuits and Systems (ISCAS). Vol. 5. IEEE, 2003. 10.1109/ISCAS.2003.1206266

