VALUATION OF RELIABILITY AND PROFIT OPTIMIZATION OF A PAPER MANUFACTURING SYSTEM USING RPGT-MARKOV MODELING AND GREY WOLF OPTIMIZATION

Authors:

Shobha Sharma,Shakuntla Singla,Pooja Gupta,Adesh Kumar Tripathi,

DOI NO:

https://doi.org/10.26782/jmcms.2026.10.00010

Keywords:

Reliability assessment; Paper manufacturing system; Regenerative Point Graphical Technique (RPGT); Continuous-Time Markov Chain (CTMC); Grey Wolf Optimizer; Active redundancy; Preventive maintenance; Profit Optimization.,

Abstract

Reliability assessment and maintenance optimization are crucial for improving the productivity, availability, and profitability of continuous manufacturing systems. Paper manufacturing plants are particularly vulnerable to equipment failures because production depends on the uninterrupted operation of interconnected subsystems. Existing studies have extensively applied continuous-Time Markov Chains (CTMC) and optimization techniques for reliability analysis; however, limited attention has been given to integrating the Regenerative Point Graphical Technique (RPGT) with CTMC and Grey Wolf Optimization (GWO) for repairable manufacturing systems incorporating active redundancy and preventive maintenance. This study proposes a reliability model for a paper manufacturing plant consisting of a pulp preparation unit, two identical paper machines operating under active redundancy, and a cutting and packaging unit supported by a single repair facility, significantly enhancing system performance. The Grey Wolf Optimizer is used to resolve the optimal failure, repair, and preventive maintenance parameters that maximize system profit while improving operational performance. Numerical and sensitivity analysis demonstrate that active redundancy and a cutting and packaging unit supported by a single repair facility. The system behavior is analyzed by developing Chapman-Kolmogorov differential equations and steady-state probability equations. Performance measures, including steady-state availability, repair facility busy period, and long-run profit, are analytically evaluated. The proposed framework provides an effective decision-support tool for reliability-centered maintenance planning and optimization in paper manufacturing and other continuous process industries. Numerical and sensitivity analysis demonstrate that the proposed framework significantly improves system availability, reduces the repair facility busy period, and increases long-run profit through the optimal selection of failure, restore, and precautionary maintenance parameters.

Refference:

I. Abbas, M., Alshehri, M. A., & Barnawi, A. B. (2022). Potential contribution of the grey wolf optimization algorithm in reducing active power losses in electrical power systems. Applied Sciences, 12(12), 6177. 10.3390/app12126177
II. Ahmadini, A. A. H., Singla, S., Mangla, D., Modibbo, U. M., & Rani, S. (2024). Reliability assessment and profit optimization of multi-unit mixed configured system using ABC algorithm under preventive maintenance. IEEE Access, 12, 85190-85202. 10.1109/ACCESS.2024.3406994
III. Angus, J. E. (2001). Availability of continuous service and computing long-run MTBF and reliability for Markov systems. Probability in the Engineering and Informational Sciences, 15(3), 369–381. 10.1017/S0269964801153064
IV. Banerjee, N., & Mukhopadhyay, S. (2019, June). HC-PSOGWO: hybrid crossover oriented PSO and GWO based co-evolution for global optimization. In 2019 IEEE region 10 symposium (TENSYMP) (pp. 162-167). IEEE.
V. Gao, S. (2023). Reliability analysis and optimization for a redundant system with dependent failures and variable repair rates. Mathematics and Computers in Simulation, 208, 637-659. 10.1016/j.matcom.2023.02.001
VI. Li, J., Tang, Y., Wang, H., Li, Z., & Jiang, X. (2025). Reliability evaluation of multi-state system with common bus performance and reserve multi-state subsystem. Applied Mathematical Modelling, 146, 116179.
VII. Liu, H., Qi, J., Feng, H., & Fan, M. (2025). Research on State Monitoring and Diagnosis Models for Multi-State Systems Based on Petri Nets. Results in Engineering, 106249. 10.1016/j.rineng.2025.106249
VIII. Maihulla, A. S., Yusuf, İ., & Koo, M. B. C. (2024). Reliability and availability analyses of an industrial system with two subsystems arranged in series-parallel. Sigma Journal of Engineering and Natural Sciences, 42(5), 1500-1510. 10.14744/sigma.2024.00051
IX. Mirjalili, S., Mirjalili, S. M., & Lewis, A. (2014). Grey wolf optimizer. Advances in engineering software, 69, 46-61. 10.1016/j.advengsoft.2013.12.007
X. Rasool, S., Saini, M., & Kumar, A. (2026). Investigation of reliability measures of washing unit in paper manufacturing plant using Markovian approach and nature inspired algorithms. OPSEARCH, 1-34. 10.1007/s12597-026-01266-z
XI. Saini, M., Kumar, A., & Sinwar, D. (2022). Parameter estimation, reliability and maintainability analysis of sugar manufacturing plant. International Journal of System Assurance Engineering and Management, 13(1), 231-249.
XII. Sharifi, M., Cheragh, G., Dashti, M. K., Zaretalab, A., & Shahriari, M. (2021). Reliability and cost optimization of a system with k-out-of-n configuration and choice of decreasing the components failure rates.
XIII. Singla, S., Kaur, H., Gupta, D., & Kaur, J. (2023, September). No idle constraint in flow shop scheduling with transportation time, weightage of jobs and job block criteria. In 2023 IEEE 2nd International Conference on Industrial Electronics: Developments & Applications (ICIDeA) (pp. 450-454). IEEE. 10.1109/ICIDeA59866.2023.10295180
XIV. Singla, S., Kaur, K., Khurana, R., & Garg, V. (2023, August). Mathematical Modeling and Cost Optimization of Rice Plant (An Application of RPGT). In 2023 Second International Conference On Smart Technologies For Smart Nation (SmartTechCon) (pp. 694-698). IEEE.
XV. Singla, S., Mangla, D., Kumar Malik, A., & Muhammad Modibbo, U. (2025). Reliability Optimization Methods: A Systematic Literature Review. Yugoslav Journal of Operations Research, 35(1). 10.2298/YJOR230715031S

View Download